Desulfurization L2 ideal
Created Wednesday 15 October 2014
Basic model of a desulfurization component build up from a flue gas cell and a replaceable model for a desulfurization reaction
1. Purpose of Model
The model is used as a basic model to simulate an ideal desulfurization facility with fixed separation rate.
2. Level of Detail, Physical Effects Considered and Physical Insight
2.1 Level of Detail
Referring to Brunnemann et al. [1], this model refers to the level of detail L2.
2.2 Physical Effects Considered
- Conservation of Mass
- Conservation of Energy
- Reverse flow
- Heat Transport due to convection
- Pressure loss due to friction
2.3 Level of Insight
Heat Transfer
• ControlVolumes:Fundamentals:HeatTransport:Generic HT:Adiabat L2
• ControlVolumes:Fundamentals:HeatTransport:Generic HT:IdealHeatTransfer L2
• ControlVolumes:Fundamentals:HeatTransport:Generic HT:Constant L2
• ControlVolumes:Fundamentals:HeatTransport:Generic HT:CharLine L2
Pressure Loss
• ControlVolumes:Fundamentals:PressureLoss:Generic PL:NoFriction L2
• ControlVolumes:Fundamentals:PressureLoss:Generic PL:LinearPressureLoss L2
• ControlVolumes:Fundamentals:PressureLoss:Generic PL:QuadraticNominalPoint L2
Geometry
- Cylinder geometry : Generic geometry
3. Limits of Validity
- Steady flow.
- Fixed control volume.
- Averaging assumption violated.
- The equations imply that the outlet states equal the states in the balance equations - Not true for large volumes and high gradients.
4. Interfaces
4.1 Physical Connectors
Basics:Interfaces:GasPortIn inlet
Basics:Interfaces:GasPortOut outlet
5. Governing Equations
5.1 System Description and General model approach
The model is build up from a FlueGasCell and a desulfurization model. Please have a look into these models for further details.
Summary
A summary record is available which bundles important component values.
7. Remarks for Usage
9. References
[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulation of Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012
10. Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright 2011 - 2022.
Remarks:
This component was developed during DYNCAP/DYNSTART projects.
Acknowledgements:
ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
11. Version History
Date - Version - Description of changes - author/revisor
25.06.2014 - v0.1 - initial implementation of the model - Lasse Nielsen, TLK-Thermo GmbH
03.04.2019 - added eye connector
Backlinks: ClaRa:A User Guide:Revisions:v1.4.1